|
ScanNow Settings |
  
|
|
ScanNow Settings |
|
ScanNow Settings window allows you to set the settings of the scanner as required. You have various options as displayed in the following image. Description of all the options is as follows:
| • | Color Scan Options: Select among black and white (highly recommended since it uses the least amount of disk storage space), gray scale or color. |
| • | Page Scan Options: You can choose to scan a single side or both sides of the sheet. |
| • | DPI (Dots per Inch): After setting this option, the document will scan with the selected number of Dots Per Inch. The smaller the number, the less sharp the image will appear. For most documents, the lowest number of DPI should suffice. |
| • | Select Default Scanner: You can set a scanner as a default scanner by selecting the appropriate scanner from the drop-down list. |
Note: |
If you are unable to view the desired Scanner in the drop-down list, it is recommended to click on the URL (Can't find a scanner that you are looking for? Click here) displayed at the bottom of the screen. Try doing this for three times and if still you do not find the scanner in the drop-down list, contact PaperSave Support Team. |
| • | Output Type: You can select the required Output Type for the scanned document by selecting the appropriate option from the drop-down list. Default Output Type will be Searchable PDF. |
After selecting the appropriate options for the above mentioned settings, click Save to save the changes.
